Tech Central

Operating Instructions

OPERATION:

• Set up pads alongside car. Scale pads are interchangeable.
• Connect cables from control box - note RF, LR, etc.
• Connect power supply, turn on control box, allow to warm up for a few seconds. PushZERO.
• Lift car and place pads under wheels. "Shake" car up & down at each corner to settle out any shock or suspension friction.

NOTES:

• Keep the system clean and dry. Do not drop either the pads or the control box.
• Route the cables so that no one trips and they do not get run over by floor jacks.
• A pad disconnected is indicated by ----. Scale capacity is 1500 lbs. per wheel.